repair

EWP Mechanical Repairs

Fault diagnosis and mechanical repairs for elevated work platforms, on site or in the workshop, across all makes and models.

Service Overview

When an elevated work platform develops a mechanical fault, the repair starts with finding the cause rather than treating the symptom. Our mechanics diagnose engine, drivetrain, slew, boom and structural faults on truck-mounted EWPs, boom lifts, scissor lifts and other access equipment, then set out a scope you can approve before work begins.

Repairs are carried out to manufacturer specification using genuine or approved parts, function-tested before the machine goes back to work, and documented so the unit's maintenance history stays complete. We work across all major brands, and where the fault turns out to be hydraulic we hand it to the hydraulic team rather than guess.

How an EWP mechanical repair runs

Diagnosis comes first. A mechanic confirms the fault on the machine, traces it to its cause and checks whether anything else has been affected, because a slipping slew drive or a boom that will not stow often has a different root cause from the one the operator reported.

You then receive an agreed scope: what is being repaired, which parts are needed, whether the work happens on site or in the workshop, and what testing is required afterwards. Nothing beyond that scope is started without your say-so. Parts are sourced as genuine or approved equivalents once the scope is approved, and the repair itself is carried out to the manufacturer's specification.

Before the unit is handed back it is function-tested through the affected systems, and where the repair touched a load-bearing or safety-critical component the testing is extended to suit. The work, the parts fitted and the test results are then recorded against the machine so its maintenance history remains complete for the next inspection.

What affects EWP repair cost?

Every repair is quoted on its own scope rather than from a rate card, and the quote reflects a handful of factors. The first is diagnosis: an intermittent electrical or control fault can take longer to isolate than an obvious mechanical failure. The second is parts, where the make, model and age of the machine decide what is available, how quickly, and whether a genuine, approved or reconditioned part is the sensible choice.

Labour follows from the scope and from access to the component: a slew ring or a boom pivot pin takes more disassembly than an engine ancillary. Where the machine is, and whether it can be repaired on site or needs transport to the workshop, also matters. Finally, the testing required to return the unit to service, which depends on which system was repaired, is part of the job rather than an extra.

To prepare a quote we ask for the make, model and symptoms, photos or video where you have them, and the machine's recent history. The more of this you can provide up front, the fewer assumptions the quote has to carry.

Mechanical repair vs hydraulic, servicing and breakdown

Mechanical repair covers engines, drivetrains, slew and boom components, structure and controls. Faults in hoses, cylinders, pumps and valves are hydraulic work and go to the hydraulic team. Routine lubrication, adjustment and wear-part replacement belong to scheduled servicing, and a machine that has stopped on a job and needs someone there now is an emergency breakdown call. If you are not sure which applies, describe the symptom and we will route it correctly.

What to include in your repair enquiry

A few details let us diagnose remotely where possible and arrive with the right parts. Send what you have:

Make, model and year of the machine
The fault or symptom, and when it occurs (cold start, under load, at full extension)
Photos or a short video of the problem, if safe to capture
Where the machine is and whether it can be moved
Recent repairs or servicing on the unit

Why Choose EWP Australia

Workshop and on-site repairs across all makes and models.
Diagnosis and rectification of engine, drivetrain and structural faults.
Repairs documented so your maintenance history stays complete.

Key Features

All makes and models
Genuine and approved parts
Workshop and on-site capability
Manufacturer-spec repairs

How It Works

A straightforward process built around keeping your equipment compliant, safe and working.

Diagnosis

We identify the root cause of the fault, not just the symptom.

Quote & approval

You get a clear scope and quote before any work begins.

Repair & test

Repairs are completed and function-tested before the unit returns to service.

Frequently Asked Questions

Answers to common questions about ewp mechanical repairs.

Do you repair all brands of equipment?

Yes. Our technicians work across all makes and models of elevated work platforms and access equipment.

Can you carry out repairs on site?

Where practical, yes. On-site repairs reduce downtime and transport costs; larger jobs are completed in our workshop.

Will repairs affect my compliance?

All repairs are carried out to standard and documented, so your equipment stays compliant and your maintenance records stay complete.

How quickly can you turn a repair around?

Turnaround depends on parts availability and scope of work. We scope every job up front and prioritise safety-critical repairs.

How much do EWP repairs cost?

There is no flat rate. The quote depends on the diagnosis, the parts the machine needs, the labour and access involved, where the unit is, and the testing required to return it to service. Send us the make, model and symptoms and we will prepare a scoped quote.